Friday, January 16, 2009

Refurbished Projector A More Affordable Alternative

Refurbished Projector - A More Affordable Alternative
By Clifford Tan

If affordability is a major concern to you, refurbished projector might be the best way to go.

While it would be nice if everybody could afford to buy the top-of-the-line home projection theater, it is understood that not everybody can.

There are many viable alternatives when considering the components of a home projection theater.

One of the best ways to do this is with a factory refurbished home projector. You can get all the quality of a brand new projection unit without the high cost often associated with them.

Frequently, people will have a minor problem with any product when enough of them are sold. Given the wide spectrum available in home projection theater components, home projectors are being sold in record numbers.

When a projector or one of its components is not functioning exactly right, it is returned to the factory where it is refurbished. This does not mean the consumer is getting a damaged projector. In fact, the truth is quite the opposite. The quality of a factory refurbished home theater projector is every bit as good as a brand new projector.

Factory refurbished means that the home projector or whatever component of the home projection theater system, has been returned to the factory for one reason or another. This is usually for a very minor problem. Perhaps a lamp was not working properly, or a cooling fan or some other small component of the projector was not functioning at one hundred percent. When the home projector is returned to factory for refurbishing, qualified technicians will test every component of the now refurbished projector to make sure it is operating as well as (or in this case better than) a brand new home theater projector.

After the projector is refurbished from top to bottom, inside and out, it is sold again at a substantially discounted price. This means that the product has been completely tested at the factory it was made in, by the people who made it, and they have now guaranteed that the refurbished projector is as good as a new projection unit.

Any of the brand name producers of home projection theater systems will have the occasional factory refurbished projector. If you are looking for a certain type of projector you will need to check that companys web site to obtain the information about their refurbished home projection theater components.

If you do not see any information regarding factory refurbished projectors, or the specific home theater projection unit you are looking for, the company will still list contact information on their site. It may be necessary to contact them in order to find the exact refurbished projector model you are looking for.

If you are in the market for a new home theater projection system, factory refurbished projectors are a very good way to start. This will allow the consumer to purchase brand new home theater product from brand name companies and make sure that they get the home theater projector that is right for their needs.

While the refurbished product lines are not commonly available and you have to search to find them, buying a refurbished video projector from whatever brand name company can save the consumer a lot of money.

Article Source: http://EzineArticles.com/?expert=CliffordTan
http://EzineArticles.com/?Refurbished-Projector---A-More-Affordable-Alternative&id=228697

Sunday, January 11, 2009

Digital Projector Guide Some Tips for Digital Projectors

Digital Projector Guide- Some Tips for Digital Projectors
By Sardool Sikandar

Digital projectors are equipments of modern technology. These are used to convert image data directly from the computer onto a screen via lens system. Digital projectors provide visualization of data that is actually stored in a computer for presentation. These projectors enable the viewers to watch moving images from a DVD, digital versatile disc player. Advertisers or sellers also use these projectors to give demonstration of products to a large number of customers. It can easily convert written documents onto an interactive whiteboard.

Digital projectors play an important role in the formation of home theater systems. These projectors use resolution of SVGA standard i.e. 800600 pixels in expensive devices. Cost of digital projector is determined by its resolution as well as its brightness. If youre going to use it in large rooms or big conference halls its brightness should be from 1,000 to 4,000 ANSI lumens.

First digital projectors, Eidophor projectors were introduced in 1950. Eidopher projectors used an oily surface in a rotating disk with light shining through it and employed an electron beam to disrupt oil in a specific manner. Eidophor projectors were not able to produce colors. Nowadays there are several high quality models of digital projectors are available in market so Eidopher projectors are less common.

Following four technologies are used in digital projectors:

High intensity CRT
LCD projectors using LCD light gates
Texas Instruments' DLP technology
Eidophor oil-film projectors (obsolete)

At present LCD projectors use Texas Instruments DLP technology whereas the high intensity CRT devices are suitable for enduring installations. Entire working of cathode ray tube digital projectors is like CRT television set. These projectors may be configured with one RGB color tube that has three colors red, green and blue with a single lens, one black & white tube with a rotating color wheel or three RGB color tubes with three lenses. Projectors having cathode ray tubes are usually bulky thats why these are the best projectors for fixed installations.

LCD digital projectors are portable and lighter enough in comparison to CRT and can be easily shifted from one place to another. These are very much popular and available in various shapes and sizes. CRT and LCD digital projectors come under the category of transitive projectors.

Reflective projectors are the superior digital projectors that provide high quality images. These are affordable and offer next level of entertainment. Everyone can enjoy home theater applications with the help of digital projectors.

About Author: The Author owns a website on Digital Projectors. The website offers advice on how to buy cheap digital projectors. It is the best source to get latest information about digital projectors. You can visit his site about multi media projectors.

Article Source: http://EzineArticles.com/?expert=SardoolSikandar
http://EzineArticles.com/?Digital-Projector-Guide--Some-Tips-for-Digital-Projectors&id=132926

Tuesday, December 9, 2008

How You Can Increase The Lifespan Of Your Projector Bulb Or Lamp

How You Can Increase The Lifespan Of Your Projector Bulb Or Lamp
By Clifford Tan

The replacement of projector bulbs is an all-too-frequent occurrence for anybody that has owned a home theater projector for any length of time. While a two thousand hour lifespan may sound like a lifetime to some people, rest assured it is not long before the projector lamp will need replacing. There are however, some general tips that can help to expand the life of a headlamp for the projection unit.

Do not touch the lamp with bare hands
One of the most frequent problems encountered is people replacing the bulbs with their bare hands. While this is fine for an ordinary light bulb, it is not a good practice for a projector lamp. The lamp in a projection unit burns much hotter than any regular light bulbs. The effects of touching it with bare skin are equally magnified and problematic.

Touching a projector bulb with the bare skin leaves traces of oil on the lamp surface. While this may seem a very minor detail, it is detrimental both to the bulb and the quality of the resulting multimedia display. The oils will get burnt onto the lamp and drastically reduce the lifespan. As the oil is baked into the surface, it actually diffuses the light being projected, reducing the lumens actually being sent to the refractive surfaces. The light will not be enough to project the image that has come to be expected from the home theater projection system. While the problem may not be noticeable at first, over the course of a little time, the quality will degrade to the point of not being viewable.

Turn off the projector power after turning off the lamp
It is highly recommended to turn the power on the projector to the off position only after having turned off the lamp and allowing it to cool. This will allow the cooling fans to do the job they were designed to do. While rapid cooling and heating result in repeated contractions and expansions of the bulb filament, it is much better that it be done more quickly with the cooling fans. Likewise, turning the projector on and allowing the cooling fans to run for a moment before turning on the lamp will help as well. This will add hours to bulb life expectancy and allow for longer hours of viewing pleasure on the home theater projection system.

Constant Movements
Constantly bumping or moving the projector, especially while it is hot can be very detrimental to the projector lamp. The filament in the bulb loses almost all tensile strength when it is heated during normal usage. It is much the same as the filament in a camp lantern. The principle is the same; the filament effectively becomes almost the same consistency as ash, making it extremely vulnerable to damage when it is hot. Even after proper cooling, the lamp filament is very sensitive. Care should be taken when moving the projector for whatever reason. While it is always a good idea to be careful with electronic equipment, some aspects of the home projector are actually a bit more sensitive.

It will usually be necessary to move the projector when cleaning the filters. As always, it is a good idea to move it carefully without jerking it around or bumping it any more than needed. Taking an extra moment or two to check the projector mount and make sure it is still securely fastened can also be beneficial and prevent slips and movement which may otherwise be harmful.

With a little care and a little preventative maintenance, the projector lamps will still need to be changed, but not nearly as often.

Note: This article may be republish for use in websites as long as the author bio and active hyperlinks are kept intact.

Clifford Tan, a Home Theater enthusiast and owner of the website Home Projector Advisor offering projector reviews, advice and many useful tips and hints to business and home consumers looking to purchase a home projectors. To find out alot more information about home projection system, visit the site http://www.home-projector-advisor.com

Article Source: http://EzineArticles.com/?expert=CliffordTan
http://EzineArticles.com/?How-You-Can-Increase-The-Lifespan-Of-Your-Projector-Bulb-Or-Lamp&id=192918

Monday, November 24, 2008

Some Things Your Projector Dealer Might Not Tell You

Some Things Your Projector Dealer Might Not Tell You
By Clifford Tan

A salesman is a salesman. He does not make a living if he does not sell something. So it may sometimes happen that a salesman or a dealer will not tell the buyer all of the relevant facts about a given product. We have tried to list enough of them here to give you a general idea of what to look for and what to ask.

Bulbs or the Headlamp
This is probably the one thing that gets overlooked more than anything else. The bulbs are an expensive part of the home theater system and need to be checked out carefully before purchasing a projection unit. What is the projected bulb life? How many lumens does it generate? These are specific questions that should generate specific answers that the projector dealer may not otherwise mention.

Contrast Ratios
Contrast ratios are something else that needs to be considered. The projector dealer may or may not know the statistics regarding a specific projector unit, but what about the ambient lighting in the room where the projector will be used. Is the light source constant or is it varied? Properly factoring in the light source in the room where the theater projector will be set up is not something that many dealers or salesmen will volunteer to do for the buyer.

Screen
The screen is also an important part of the whole home theater experience. Which screens work best with which types of projectors is likely something the salesman or dealer is not going to know and will not tell you without prodding. Having the information beforehand can save a lot of time and grief when shopping for a home theater projector.

Mounting
What types of mounts are included with the projector is something they may or may not refer to at the projector dealer, but what else is there to consider with mounts? Is the projection unit prone to overheating when mounted on a shelf mount? Is it compatible and able to be mounted in the proper place for the distances in the room where it will be used? Another factor in regards to the mounting of the multimedia projector is the hazard of creating a keystone effect by mounting the projector incorrectly or off center. What kind of variance do the optic lenses on the projector provide to prevent this? Is there only a vertical adjustment or does it have both horizontal and vertical optic controls? Does it only have the keystone adjustments or does it provide digital adjustment as well? Mounting the multimedia projector properly is a key factor in being able to properly enjoy a high quality picture with the home theater projection unit.

Is this the right projector for me?
Is the projector really compatible for the uses that are needed or is the salesman or dealer just trying to push a product off on the consumer? Knowing which projectors are better for what types of displays is something that the dealer may not even know about. Different home theater projectors have different uses. Some work better with movies, videos and video games, and some work better for still-multimedia presentations. Being knowledgeable about which projector does what can save a lot of hassling with the uninformed salesman or the dealer who just wants to move projectors out of his store.

To be forewarned is to be forearmed. No matter how well prepared the salesman is or how honest the projector dealer is, they have many different products that they have to know a lot about. Even the salesman with the best intentions will not know everything about all of the home theater projectors available. There are many things the projector dealer will not tell you.

Note: This article may be republish for use in websites as long as the author bio and active hyperlinks are kept intact.

Clifford Tan, a Home Theater enthusiast and owner of the website Home Projector Advisor offering projector reviews, advice and many useful tips and hints to business and home consumers looking to purchase a home projectors. To find out alot more information about home projection system, visit the site http://www.home-projector-advisor.com

Article Source: http://EzineArticles.com/?expert=CliffordTan
http://EzineArticles.com/?Some-Things-Your-Projector-Dealer-Might-Not-Tell-You&id=192915

Sunday, November 23, 2008

Tips on Comparing Prices on Projectors

Tips on Comparing Prices on Projectors
By Jim Gelder

Buying a projector is an investment that you want to be sure you make wisely. So taking the time to do some comparison shopping when it comes to prices is simply a smart thing to do and something you certainly wont regret.

There are several ways you can go about comparing prices on projectors. The first is to visit electronics stores and office supply stores that sell projectors and check out their prices in the stores. This is an especially good method during sales. Its also a great way to get a good deal locally because many stores will offer to beat their competitors best price by a certain percentage, which can save you even more money.

You can also research and compare prices on projectors online. Doing your projector price comparison shopping online makes it possible for you to check out a much larger number of prices on projectors than you can do by going from store to store. This will also make it possible for you to check out the prices on a wider number of brand name projectors and even look into the prices of used projectors. Online auction sites such as eBay are great places to compare prices on used projectors.

Consumer report magazines are also a good resource for comparing prices on various projectors. These reports have the advantage of also rating the projectors, so you can compare quality as well as prices on projectors.

This is an important part of comparing prices on anything, whether its projectors or cars. You want to get the most value for your money, and that means that many times a medium priced item is actually a better value than a higher priced one because it has more features than a stripped down top brand name one has.

Also, even before you start comparing prices on projectors, its a good idea to have a budget in mind for what youre willing to spend for your projector. This will help you focus your price comparison, although you dont want to rule out looking into projectors that may cost more than youve budgeted for because you may run into an unexpected bargain as you do your research.

And if the thought of doing all the research needed to compare prices on projectors sounds like work to you, remember that at least half the fun of making any purchase is in the search! Make a game of it and see just how great a projector you can find for the least amount of money, thanks to your savvy comparison shopping. Then take those savings and splurge on something just for you!

Jim Gelder is a contributing writer for projectorian.com a website dedicated to offering information about projectors and projector rentals and also features a listing of local companies that offer LCD projector rentals, New York projector rentals and more.

Article Source: http://EzineArticles.com/?expert=JimGelder
http://EzineArticles.com/?Tips-on-Comparing-Prices-on-Projectors&id=141959

Saturday, November 22, 2008

Digital LCD Projectors

Digital LCD Projectors
By Ken Marlborough

Digital projectors are the modern replacements for the rather traditional transparency projectors. Transparency projectors worked by shining light through a semi-transparent material. Digital projectors, by contrast, project a digital image directly from a computer through a lens on to a screen.

LCD (Liquid Crystal Display) digital projectors are much lighter and more portable than their CRT (Cathode Ray Tube) versions, making them widely popular. With the advent of new LCD technologies, digital projectors have been developed which have very clear and crisp fidelity even at large projection sizes. The LCDs used in digital projectors are approximately the size of a small color slide, and in fact the projectors operate very much like a traditional slide projector. The main difference is that the slide is constantly changing.

A Digital LCD projector has its light source contained within its base. It projects light upwards through the transparent image (which sits on a glass stage) to a lens on the top (head) of the unit and out onto the projection screen. In other words, the light shines through the image to project it. These projectors work well with printed film transparencies or an LCD panel computer display and provide bright, sharp images.

Slightly higher end Digital LCD Projectors can be used for Cinema/exhibition, Post-production, On-screen advertising, Digital film mastering, Multi-media theatrical productions or other large entertainment venues. Most of the recent Digital LCD projectors can be installed with existing film projectors and also provide an interface for theatre automation equipment.

The future of digital projectors is exciting, with new technologies constantly being developed. As more and more theatres switch to digital projection, consumers cannot help but reap the benefits. As these technologies become more affordable they will inevitably find their way into home systems and allow each of us to experience the joy of a full theatre projection in our own home.

LCD Projectors provides detailed information on LCD Projectors, LCD Projector Rentals, LCD Projector Lamps, LCD Video Projectors and more. LCD Projectors is affiliated with Cheap LCD TVs.

Article Source: http://EzineArticles.com/?expert=KenMarlborough
http://EzineArticles.com/?Digital-LCD-Projectors&id=405805

Thursday, October 30, 2008

Projector Screens

Projector Screens
By Jennifer Bailey

When there is a projection of a video or an image, the presence of a projector screen is inevitable. A projector screen is a specially made flat screen to be hung on the wall or erected vertically, where the image is reflected, so that the image size is enlarged. The surfaces of such screens are usually rough, and colored white.

There are a number of types of projector screens. They are home cinema projector screens, portable projector screens, manual projector screens, electric projector screens, fixed frame projector screens and also movie board home cinema projection screens.

Home cinema projector screens are the screens with the viewable screen central to the eye. Some of the products that are popular include: CinElpro Electric Projection Screens (230cm), Cinema Electrol Projection Screens (190cm), Diplomat Channel Fix Electric Screens (290cm) and Diplomat Channel Fix Manual Video and Screen Formats (290cm).

Portable projector screens are for temporary positioning or for occasional use. These screens are easy to carry to various places. Most of the screens are foldable and are usually carried in coils. Some of the products that are popular are: Fast fold (427cm), Leader Portable Floor Screens (177cm), Movielux Compact Portable Floor Screens (160cm), Picture King Standard and Video Format Tripod Screens (244cm), and Professional Tripod Screen (240cm).

Manual projector screens can be pulled down and recoiled back from the ceiling, or wall mounted. Some of the products are Proscreen Manual Wall Screens (280cm) and Slim Screen Manual Wall Screens (200cm).

Electric projector screens have motorized drop and retraction through the use of wired switches or remote controls.

Fixed frame projector screens are permanently fixed frame screens. Some of the products are Cinema Contour Professional Framed Projection Screens (488cm) and Designer CineFix Home Cinema Projection Screens (200cm).

Projector Screens provides detailed information on Projector Screens, Video Projector Screens, Home Theater Projector Screens, Electric Projector Screens and more. Projector Screens is affiliated with Large Format Flatbed Scanners.

Article Source: http://EzineArticles.com/?expert=JenniferBailey
http://EzineArticles.com/?Projector-Screens&id=272041